635R from Cromax is a 2K etching primer that is approved by several leading car manufacturers. 635R can be coated with 2K surfacers from Cromax, is VOC compliant and offers very good corrosion resistance.
Excellent adhesion on bare metal substrates
Very good corrosion resistance
Can be coated with 2K surfacers from Cromax
NS2602 – NS2607 NON-SANDING PRIMER-SURFACER
NS2602-NS2607 are extremely versatile non-sanding primer-surfacers that eliminate the need for a two-stage build-up to boost productivity. They can be applied directly over metal and unsanded E-coats, as well as exterior plastic parts using the additive AZ9600. They are suitable for all Cromax topcoats.
Primer and surfacer in one
Wide application window
AZ9600 plastic additive
Can be applied directly on metal
Wide tolerance for spray gun settings
Fast recoat time
Reduced topcoat consumption
Suitable for common plastics without adhesion promoter
901R – 907R UNIVERSAL 2K PLASTIC PRIMER-SURFACER
901R (white) and 907R (black) from Cromax are 2K ValueShade plastic primer-surfacers that improve topcoat coverage. 901R and 907R are based on special polymers, extremely resistant to stone chipping, and can be applied directly on OEM exterior plastics without adhesion promoter or substrate testing.
Suitable for most common OEM plastic parts on vehicle exterior
No adhesion promoter needed; easy mixing ratio
Good filling properties
Pre-flexibilised primer surfacer
Part of the ValueShade concept
No complicated testing required
Less stock holding; simplified stock control
Excellent stone-chip resistance
Less topcoat consumption
1051R – 1057R HIGH PRODUCTIVE SURFACER
High Productive Surfacer White (1051R) and High Productive Surfacer Black (1057R) are highly productive surfacers that can be used as sanding surfacers and as maxi fillers for all Cromax topcoats. They provide a good performance with no edge mapping. By adding High Productive Accelerator AZ1050, the surfacers help to deliver increased productivity through air-drying.
Combines excellent filling properties with excellent vertical stability
Suitable for fast air dry or quick curing with minimal IR power
Helps bodyshops focus on saving time and energy while supporting high throughput
It has a dedicated and unique High Productive Accelerator AZ1050
For increased productivity, use with XK203 and AZ1050 in a 5:1:2 mixing ratio
Aids productivity with an easy dry-to-sand in 30 minutes air dry at 20°C
As a sanding surfacer, it can be applied up to 3 coats in wet on wet application when used with AZ1050
Part of the ValueShade® concept
LE2001 – LE2004 – LE2007 LOW EMISSION SURFACER PLUS
LE2001, LE2004 and LE2007 from Cromax are premium low-emission 2K surfacers for both sanding and non-sanding applications. LE2001, LE2004 and LE2007 are VOC-compliant and can be mixed to all seven shades of ValueShade grey for optimum topcoat coverage.